$ 45
4.8 (678)
In stock
Arrives by Tomorrow
.
Order within 00 hr 00 min
Save $8.55 off this item after joining.
Description
Check Your Battery Before It Dies A Minor Investment Saves You from Headache Were you sitting in the car and wondering why you can’t start the car? The cause of this may be a flat battery. Keep a close eye on battery status, and fix potential problems. Save mechanic costs and many more. What can TOPDON BT100 do? Wide Battery Coverage: works for 100 to 2000CCA regular flooded, AGM flat plate, AGM spiral, Gel, and EFB; Charging Test: helps determine if the output voltage of the generator, the rectifier diode, and the charging current is normal. 3-LED Indicators: easy to tell if battery’s good (Green), there’s a warning (Orange), or there’s a serious issue (Red). Convenient Test: support both in-vehicle and out-of-vehicle test; no need to remove the battery out of vehicle. Built-In Protection: polarity reverses connection protection with spark proof; no heat generated while operating, or cause battery discharge. Easy & Quick Operation: show concise suggestions in seconds (Good, Bad, Recharge, Replace), with menu buttons to navigate easily. Note: For load test, please connect the product to your car and ignite the car on. Cranking Test If your battery is 4 or more years older, and it does not seem to crank your engine at a normal speed, you probably need a new battery. This 12V battery tester can show you the cranking voltage, and the cranking time in milliseconds, to help predict if the battery will fail to crank/start the vehicle. Unloaded Voltage means the voltage measured when turning off all the on-board electrical appliances. Charging Test Use this battery load tester to check if the generator provides sufficient power to the vehicle electrical system, and if the battery can hold the charge. More data are also included: CCA value/rating, voltage, internal resistance, state of health (SOH), and state of charge. Show Battery Health This automotive alternator tester will display test results: “GOOD, BAD, REPLACE, or RECHARGE”, concise and easy to understand for your quick reference. GOOD BATTERY: Battery is in good condition, no worries! GOOD, CHARGING: Good battery but low voltage, charge before using. REPLACE: Battery almost reaches the end of the using life, please replace it for car running. BAD CELL, REPLACE: REPLACE: Battery is interior damaged, bad cell or short circuit, replace it. RETEST AFTER CHARGING: Low voltage, charge and retest to avoid error. Stay Safe Always The risk of causing damage tends towards zero when using this load tester. Easy Battery Tester This entry-level auto battery analyzer is made for newbies, with helpful features such as extra-large clamps for a solid connection, intelligent LED status indicators for quick test, and 5 large keypad buttons that make the menu easy to scroll. You can directly check the vehicle battery under the hood. Out of Vehicle – can test the independent battery. Can Work in Hot & Cold You live in someplace where the weather is harsh? Then you need this durable car battery tester, which can stand the extreme cold and heat (operation temp. range: -4℉~140℉, -20℃~65℃). 6 Languages Support This BT100 battery tester can be used by people from different parts of the world, as it is multilingual. For users who are not English speakers, they can easily switch the function menu into Russian, Spanish, French, Italian, and German. [Car Battery Tester] You can easily test and inspect your 12V lead-acid battery with this TT TOPDON car battery tester. The SOH (State of Health), SOC (State of Charge), Voltage, Current, Rating, and numerous other understandable analytical data are provided by this battery tester. [3 Testing Function] A battery health test will determine whether or not the battery is in excellent operating order. Check to see that the charging current, rectifier diode, and generator are all functioning normally. This handy auto battery analyzer makes sure your summer road trips won’t end on a flat. It's easy to use because it operates through a menu system. Additionally, for a reliable and secure connection during the testing process, premium-quality copper clamps have polarity reverse prevention and spark proof features. [Great Choice] The TOPDON BT100 is small and compact, making it simple to keep in a glove box or center console.
